Is it high or low? See your levels at a glance.

Pick the crop, the variable and the method printed on your report. We show the ranges from very low to very high and where your value falls.

Crop
mg/kg
In mg/kg

Phosphorus (P)Mehlich-3 · mg/kg

  1. Very lowbelow 15Far below the reference range
  2. Low15 to below 30Below the reference range
  3. Adequate30 to below 75Within the reference range
  4. High75 to below 150Above the reference range
  5. Very high150 or moreFar above the reference range

These ranges come from a coffee study in Guatemala. The middle limits are the published ones; the outer limits (very low and very high) were set by SoilBalance. Use them only with values in mg/kg or cmol(+)/kg, not mg/L.

Source
Anacafé / Analab, Mehlich III table for coffee (López and Martínez, 2021)
Status of this range
Being calibrated — A range approved by SoilBalance; validation against local field soil tests is still pending.

These are reference ranges, not a dose recommendation. They change with the crop and with the method: the same number can be “low” with one method and “adequate” with another, so always use the method on your report.

And how much does your crop need?

The converters do the arithmetic. NutriPlan reads your soil test and builds the nutrition plan.

Try NutriPlan